最终充电电流
- It is reasonable to control the finishing rolling temperature around 900 ℃ and the cooling rate after rolling about 30 ℃/ s.
终轧温度控制在900℃左右是比较合理的；轧后冷速应在30℃／S左右。 - The results indicate that mass production can be realized with suitable finishing temperature and cooling rate by using the following production process: heat → perforation → MPM → extracting mill → tube sizing and reducing → cooling.
结果表明，选用合理的终轧温度和冷速，采用加热→穿孔→连轧→脱管→定减径→冷却，可实现大批量生产。 - In order to reduce the plate loss of side and end cutting, to increase the finishing product rate, the test research of the plan view control of the MAS ( Mizushima automatic plan view pattern control system) method was completed.
为减少轧制中钢板的切边、切头尾量，提高钢板的成材率，利用厚板展宽轧制法（MAS）对轧制过程中钢板的平面形状控制进行了试验研究。 - The recovery rate of the inpatients 'second survey, performed 1 week after the admission, was 100% with a finishing rate of 94%.
消化科患者住院接受治疗1周后测试量表的回收率为100%，量表的完成率为94%。 - To use two horizontal loopers among three rolling mills in small section continuous finishing mill unit and to adjust the rotation rate of electric motor through adjusting signal using PLC realize tension free rolling.
在小型精连轧机组三架轧机之间采用两架平活套器，通过PLC进行信号处理来调节电机转速，实现无张力轧制。 - Results: the cut-off scores were that finishing 26 items successfully in 120 seconds and the correct rate was higher than 30%. The retest reliability was 0.78 and the academic statues and the predicting congruence rate of the test was 94.7%.
结果：该测验的划界分数为120秒内正确完成26题，同时正确率应大于30%，重测信度0.78，总预测符合率为94.7%。 - After finishing, the bacteriostatic rate can be up to 99% even after 100 times of washing. It has no reaction to human body and is no influence on the physical properties and apparent quality.
整理品经100次洗涤后，抑菌率仍为99%以上，对人体无过敏反应，不降低织物的物理指标和外观质量。 - To reflect the exact influence of dying and finishing process to the fabric size, the fabric shrinkage rate, each process is studied by the simulated experiment of the dying and finishing for the polyester filament fabric.
为了确切反映染整加工中每道工序对织物形态的影响，实验模拟了不同品种的涤纶长丝织物的染整工艺，分别考察各工序处理后织物缩率的变化。 - Among the reclaimed questionnaires, there were 773 completely finished questionnaires with the finishing rate of 97.2%.
在回收调查表中，所有项目均被完成的有773份，调查表的完成率为97.2%。 - The research on alkali reduction treatment of linen-like polyester fabric in dyeing and finishing addressed the effect of the dosages of NaOH and promoter SN on the rate of weight reduction.
研究了涤仿麻织物在染整加工中的碱减量处理。探讨了碱剂NaOH、促进剂SN用量对减量率的影响。 - Through experiment the temperature of beginning and finishing crystallization and crystallization activation energy of different iron content Ni Fe P alloys in different heating rate were obtained.
通过实验得出不同铁含量的Ni－Fe－P合金在不同加热速度下的开始晶化温度、结束晶化温度，并计算出其晶化激活能。 - The influence of finishing temperature and cooling rate after hot rolling on the microstructure and mechanical properties has been studied for a low carbon Mn Mo Nb steel.
研究了低碳锰钼铌钢终轧温度及轧后冷却速度对钢的显微组织和力学性能的影响。 - Results After finishing heavy metal removal step, the loss rate of the dry-extract was lower than 7%, and the heavy metal contents in dry-extract were lower than national limits.
结果脱重金属后干膏得率损失低于7%，各批经过脱重金属单元所得干膏的重金属含量均低于国家限量。 - An experimental finishing was conducted with K9 optical glass using the developed MR fluid, and experimental results show that the maximum removal rate of optical glass is 0.4 μ m/ min.
用所配磁流变液对K9玻璃进行抛光实验，试验结果表明，磁流变抛光的材料最大去除率为0.4μm/min。 - One month after finishing the treatment, we revisited and recorded recurrence rate.
治疗结束后1月，随访复发情况。 - From the point of dyeing results, the dyeing effect of fabric after enzyme finishing was better than before. Dyeing rate and K/ S value of fabric were all increased.
从染色效果上来看，酶柔整理后的织物的染色效果要优于织物原样，织物的上染率提高，K/S值增加。 - A separate-winder is a finishing equipment in the aluminum foil processing. The separate cutting quality of a separate-winder has an important impact on the quality of aluminum foil and the rate of final products.
铝箔分卷是铝箔生产的重要工序，分卷机是铝箔加工中的精整设备，分卷机的分切质量是很重要的，它对铝箔的成品率的影响是非常重要的。 - MRF ( magnetorheological finishing) is a way to accurately control the removal rate of deterministic polishing method.
磁流变抛光技术是一种可以精确控制去除量的确定性抛光方法。